Device Power
      Back to home
      1. Knowledge Base
      2. RealWear Navigator™ 500 Series
      3. Device Power

      Turn ON Your Device

      To turn ON RealWear Navigator, do the following:

      1. Press the battery status button to check the battery charge level.
        Note: A full charge is indicated when the four LEDs illuminate.

        1.16
      2.  Charge the battery, if required. 
      3. Press and hold the power button for 3 seconds.
        Note: The bootup sequence is approximately 15 seconds. Once the device boots up successfully, an audible notification is heard, and the home screen appears on the display.

        1.3