Battery Use

Direct Charging

The RealWear Navigator battery is charged with the included USB-C cable and a wall charger (sold separately).

To charge the battery, do the following:

  1. Connect the USB-C cable to the RealWear Navigator USB-C port.
  2. Connect the charging cable to the wall charger.
  3. Plug the wall charger into an electrical outlet.
  4. The LED next to the power button illuminates solid yellow during the charging cycle.
  5. The LED illuminates solid green when charging is complete.
Battery Status Indicators
LED Color Definition


Battery charge is less than 10%.


Battery charge is less than 60%.


Battery charge is more than 60%.


Bluetooth pairing is active.

Note: The battery charge status is also shown on the RealWear Navigator display.