RealWear Arc 3 Series
      Back to home
      1. Knowledge Base
      2. RealWear Arc 3 Series

      Security Setup

      The Configuration App, located in My Programs on your RealWear Navigator device, scans a QR code that contains information for language, time zone, time, and Wi-Fi connections.

      Note: Before doing this procedure, download the RealWear Companion from the Apple App Store or Google Play.

      To configure the device remotely from a web browser, do the following:

      1. Open a web browser from your computer.
      2. Go to realwear.com/knowledge or realwear.setupmyhmt.com/configure.
      3. Click Configuration.
        Note: You can also click the Configuration link in the navigation bar at the top of the web page.
      4. Click First Time Setup.
      5. Select the language and click Next.
      6. Select the world region and time zone.
      7. The Set Automatically checkbox is checked by default using the values from your computer or mobile device.
        Note: To change the default settings, uncheck the box and make any applicable changes.
      8. Set the date and time and click Next.
        Note: You can also enter the Wi-Fi network SSID and password to set up the Wi-Fi network for RealWear Navigator. Most networks use WPA/WPA2 security.
      9. Click Generate Code to create a QR code on the computer or mobile device display.
      10. Put on RealWear Navigator and turn it ON.
        Note: When you turn ON RealWear Navigator for the first time, a remote configuration page opens on the display.
      11. Say “NAVIGATE HOME” and then say, “MY PROGRAMS”.

        5.3
      12. Say “CONFIGURATION”. RealWear Navigator will start to beep.
      13. Point the RealWear Navigator camera at your PC or mobile device to capture the QR code.
      14. A tone sounds after the QR code is scanned, and you are redirected to the previous screen.