Battery Use
      Back to home
      1. Knowledge Base
      2. RealWear Navigator™ 500 Series
      3. Battery Use

      Battery Hot Swap

      The battery hot swap feature puts RealWear Navigator into a low power consumption mode and allows you to swap out the battery.

      IMPORTANT

      Replace the battery within 2 minutes to maintain the current state of the system. 

      To do a battery hot swap, do the following:

      1. Remove the battery.
      2. The display stays ON and the power button blinks red.
      3. Replace the battery.
      4. Resume normal RealWear Navigator operation.